A leaning fence is an eyesore and a safety hazard, to say the least. It also reduces your home’s curb appeal and compromises the privacy and security of your home.

The average cost of repairing a leaning fence ranges between $400 and $1,100. The amount you pay will be determined by the extent of the problem but in most cases it requires replacing fence posts.

More detailed costs such as per foot and per post prices are below.

LOWER PRICE LIMITHIGHER PRICE LIMIT
Average leaning fence repair cost$200$1,000
Cost per linear foot$100$50
Cost to replace fence posts (per post)$120$400
Cost to replace fallen fence panels$100$500
Cost to repair holes and cracks$100$400
Labor costs (per hour)$50$200
Storm damage repair costs$300$200
Fence reinforcement cost$200$600
Gate repair cost$100$400
Extra cost of emergency fence repair $100$200

On average, you can pay between $400 and $1000. The job involves repairing panels and rails and rehanging fallen panels. Typically, it’s cheaper to mend leaning fences caused by poor installation or wear and tear than it is to repair a fence that’s leaning because of rot, pest infestations, or storm damage.

You will pay less if the posts and foundation are intact and more if they fall because that calls for more effort and time.

Leaning Fence Repair Cost 2021 Price Guide  HGG

Factors That Determine the Cost of Leaning Fence Repair

Many factors determine how much you pay for your leaning fence repair. Among them:

  1. The cause: Knowing what is causing your fence to lean helps determine a suitable solution and determines how much you pay for the repair of your leaning fence.
  2. The extent of the damage: Some leaning fence repairs only require a few screws to secure and stabilize the fence, while other times, it is necessary to panels posts and hardware. The labor and materials needed for either repair will determine how much you will pay.
  3. The type of fence: You can expect to pay more if your leaning fence is made of expensive materials. For instance, chain link fences are cheap to purchase and repair compared to vinyl fences.
  4. The length: You will pay more if the damage extends far down a fence because you will have to replace multiple panels.
  5. The height: Taller fences require more materials and labor to fix, so you can expect to pay more if you have a fence that’s taller than the standard height.

Leaning Fence Repair Cost Per Foot

Professional leaning fence repair costs homeowners between $10 and $50 per linear foot. Unfortunately, most repair companies have a minimum call-out price while others specify charges for certain types of repairs. As a result, they do not always charge per linear foot.

The price varies depending on the fence height, location, fencing material, and extent of the damage. You can get the fence estimate when a contractor visits the worksite.

A DIY repair is often cheaper as you only incur the material cost.

Cost to Replace Fence Posts

Broken, damaged, or shifting fence posts compromise your fence’s structural integrity and cause sagging, wobbliness, or leaning.

Sometimes the leaning or wobbliness is a result of improper installation or soil disturbances. In these instances, you won’t need to replace the posts; instead, they need to be reset or be reinforced to remain sturdy and upright.

However, other times the posts become weak, shaky, and lean due to water damage, rot, or pest infestation. In these cases, you need to replace the posts to salvage your fence. Replacing the posts costs approximately $120 to $400 per post.

More often than not, you will also find it necessary to replace the posts if they are completely damaged due to collision or shifting ground. Therefore, repositioning or resetting costs significantly less than replacing the posts.

Cost of Replacing Fallen Fence Panels

When a fence starts to lean or sag, it is common for some fence sections to collapse or fall. Fallen fence sections could potentially damage the support posts for your fence and leave unsightly gaps.

If the damage is not extreme, it’s possible for your fence contractor to reposition or screw the panels back into place. However, where there’s extensive damage, the contractor may need to replace the fallen sections.

Replacing fallen sections, such as multiple panels, a section of fencing, top rails, and support posts, could cost an average of $500 and above.

The cost depends on the type of panels, material, and size. For instance, you will spend more to replace a wrought iron section of your fence than you would pay to replace a simple vinyl panel.